Panasonic KX-TG9341T Service Manual - Page 11
Circuit Operation Base Unit - call block code
UPC - 037988479504
View all Panasonic KX-TG9341T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4.4. Circuit Operation (Base Unit) KX-TG9341T/KX-TG9342T/KX-TG9343S/KX-TG9343T/KX-TG9344T/KX-TGA931S/KX-TGA931T General Description: (DSP, Flash Memory) is a digital speech/signal processing system that implements all the functions of speech compression, record and playback, and memory management required in a digital telephone answering machine. The DSP system is fully controlled by a host processor DSP. The host processor provides activation and control of all that functions as follows. 4.4.1. DSP (Digital Speech/Signal Processing: IC501) • Voice Message Recording/Play back The DSP system uses a proprietary speech compression technique to record and store voice message in Flash Memory. An error correction algorithm is used to enable playback of these messages from the Flash Memory. • DTMF Generator When the DTMF data from the handset is received, the DTMF signal is output. • Synthesized Voice (Pre-recorded message) The DSP implements synthesized Voice, utilizing the built in speech detector and a Flash Memory, which stored the vocabulary. • Caller ID demodulation The DSP implements monitor and demodulate the FSK/DTMF signals that provide CID information from the Central Office. • Digital Switching The voice signal from telephone line is transmitted to the handset or the voice signal from the handset is transmitted to the Telephone line, etc. They are determined by the signal path route operation of voice signal. • Block Interface Circuit RF part, LED, Key scan, Speaker, Microphone, Telephone line. 4.4.2. Flash Memory (IC601) Following information data is stored. • Voice signal ex: Pre-recorded Greeting message, Incoming message • Settings ex: message numbers, ID code, Flash Time, Tone/Pulse 11