Panasonic KX-TGD56 Operating Instructions for main telephone unit use instruct - Page 49
Using Bluetooth® Devices, Pairing a Bluetooth headset to, the base unit, using a landline
View all Panasonic KX-TGD56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using Bluetooth® Devices Pairing a Bluetooth headset to the base unit Important: R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Bluetooth headset: Set your headset to pairing mode. R Refer to the headset's operating instructions. 2 Handset: MMENUN#621 3 If your headset PIN is "0000", go to step 4. If your headset PIN is not "0000", press MCLEARN, then enter your headset's PIN. R Typically, default PIN is "0000". Refer to the headset's operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When the Bluetooth headset is ready for use, the HEADSET indicator on the base unit lights up. Connecting/disconnecting a Bluetooth headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important: R Make sure that the headset is turned on. 1 To connect/disconnect: MMENUN#622 R A long beep sounds. 2 MOFFN Unpairing a Bluetooth headset You can cancel a pairing of the headset that is stored to the base unit. 1 MMENUN#612 2 MbN: "Yes" a MSELECTN R When the headset is unpaired, the HEADSET indicator is turned off. 3 MOFFN Operating a Bluetooth headset using a landline Important: R Refer to your headset's operating instructions for details. R Some features described here may not be available depending on Bluetooth headset. Answering landline calls with your headset To answer a landline call, press your headset's button. When you finish talking, press your headset's button. Note: R If you cannot hang up the call using your headset, press M N (STOP) on the base unit. Call sharing between your headset and the handset Important: R To activate this feature, you should set call sharing mode to on beforehand (page 38). n While the handset is on a landline call: To join the conversation with your headset, press your headset's button. n While your headset is on a landline call: To join the conversation with the handset, press M N. Switching between the base unit and your headset You can switch from the base unit to your headset while listening to messages recorded on the base unit answering system. R You can only switch from the base unit to your headset. For assistance, please visit http://shop.panasonic.com/support 49