Panasonic KX-TH112 2line Exp.dig.crdless Ans Sys - Page 47
Changing the PIN personal, identification number - reset
![]() |
UPC - 832680042038
View all Panasonic KX-TH112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Programmable Settings Line mode Generally, the line mode setting should not be adjusted. When another phone connected to the same line is in use, and - if k or l is not displayed on the handset, or - if {LINE1} or {LINE2} button light is off on the base unit, you need to change the line mode to "A". L You only need to program this setting once, using either the handset or base unit. Handset 1 {MENU} (center of joystick) i h i {SELECT} 2 "Set tel line" i {SELECT} 3 "Set line mode" i {SELECT} 4 Select the desired line. 5 Select the desired setting. (Default: "B") i {SAVE} i {OFF} Base unit 1 {MENU} i h i {SET} 2 "Set tel line" i {SET} 3 "Set line mode" i {SET} 4 Select the desired line. 5 Select the desired setting. (Default: "B") i {SET} i {STOP} Changing the PIN (personal identification number) ^ For security, the PIN must be entered when changing certain settings such as registering units. The default setting is "7262". Important: L If you change the PIN, please make note of your new PIN. The unit does not reveal the PIN to you. 1 {MENU} i h i {SET} 2 "Set PIN" i {SET} 3 To change the PIN for the first time, skip to step 4. To change the PIN, enter the current 4digit PIN. i {SET} 4 Enter the new 4-digit PIN. i {SET} 5 Enter the new 4-digit PIN again. i {SET} i {STOP} If you forget the PIN (resetting the base unit to its default settings) If you set the PIN and you cannot remember it, you can reset the base unit using the following procedures. Base unit: {MENU} i {MUTE} i {#}{9}{0}{0}{0} Note: L The following items are reset to their default settings: - Settings indicated by "*2" in the feature column on page 87 - Answering system: On - Line selection for answering system: Line 1 and line 2 L If you have registered a cellular phone, the following cellular phone settings are also reset to their default settings. - "Assign Base/HS" (Allows you to select which unit to ring for cellular calls, page 65): "All" For assistance, please visit http://www.panasonic.com/phonehelp 47
![](/manual_guide/products/panasonic-kxth112-2line-expdigcrdless-ans-sys-6e692e5/47.png)