Panasonic KXTG2344B 2.4 Cdl Tot 2 H/s Phone - Page 21

Preparation Preparing the Answering System 5 Select the recording time by pressing [d] or [B]. • You can also select the recording time by pressing [1], [2], [3] or [0] (Greeting only). 6 Press Save, then press [OFF]. Recording time :3min KBack dB SaveL If you select "Greeting only", the unit will answer calls with the greeting message, and then hang up. The unit will not record any incoming messages. The base unit will display " " instead of the number of messages. Number of Rings Handset You can select the number of times the unit rings before the Answering System answers a call, from "2" to "7" or "Toll saver"*. The factory preset is "4". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Press Select at "Set answering". 4 Press Select at "Number of rings". 5 Select the number of rings by pressing [d] or [B]. • You can also select the number of rings by pressing [0] (Toll saver*), or [2] to [7]. 6 Press Save, then press [OFF]. Initial setting KBack dB SelectL Set answering KBack dB SelectL Number of rings KBack dB SelectL Number of rings :4 KBack dB SaveL *Toll saver When you call the unit from a remote operation, the number of rings will tell you if there are any new messages. If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new messages. For assistance, please call: 1-800-211-PANA(7262) 21