Panasonic LB60NTU Operating Instructions - Page 47

NOTE: B If using this projector in places such as cafes or hotels to display programes for a commercial purpose or for public presentation, note that if the aspect ratio (16:9) selection function is used to change the aspect ratio of the screen picture, you may be infringing the rights of the original copyright owner for that programe under copyright protection laws. B If a 4:3 picture is projected onto a 16:9 screen, distortion may occur around the edges of the picture so that part of the picture is no longer visible. Programes which have 4:3 aspect ratios should be viewed in 4:3 mode to give proper consideration to the aims and intentions of the original programe's creator. RESIZING (S-VIDEO/VIDEO/RGB/YPBPR only) This should normally be set to "ON". (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 68 for details.) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. This may sometimes cause problems with the quality of the picture. OFF The input signal is projected at its original resolution, with no pixel conversion. The projected picture will be smaller than normal, so adjust the zoom setting or move the projector forwards or backwards to adjust the picture size if necessary. If set to "OFF", some features, such as "DIGITAL ZOOM", "REALTIME KEYSTONE", "KEYSTONE" or "INDEX WINDOW" will not function. FRAME LOCK (RGB only) Adjustments and settings If the picture's condition is bad while an RGB moving picture is projected, set "FRAME LOCK" to "ON". Refer to page 68 for compatible RGB signals. ENGLISH-47