Panasonic MCCG985 MCCG985 User Guide - Page 36

Dirt Sensor, IN OPERATION

Get Panasonic MCCG985 - VACUUM - MULTI LANGUAGE PDF manuals and user guides View all Panasonic MCCG985 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Dirt Sensor ➢ The dirt sensor light system is mounted on the POWER NOZZLE near the reset button. It consists of a series of three red lights and one green light. Dirt Sensor Détecteur de poussière Detector de tierra ➢ The lights give you an indication of the amount of dirt particles that are passing through the sensor on its way to the dust bag. INITIAL START UP ➢ When the POWER NOZZLE is first started, the following light sequence occurs in a two second time frame: 1. All three reds come on. 2. Two reds are on. 3. One red is on. 4. One green is on and will remain on until the POWER NOZZLE is placed in use. NOTE: If the nozzle is on a surface that has dirt on it, dirt will be picked up by the vacuum and one or more red lights might stay on. IN OPERATION ➢ When the POWER NOZZLE is being moved back and forth on the floor, the lights will change from one configuration to another as more dirt or less dirt is being vacuumed. ➢ As long as one or more red lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning. ➢ When the green light stays on as the POWER NOZZLE is moved back and forth over an area, the sensor is not seeing enough dirt to warrant further cleaning of that area. NOTE: Dirt sensor lights DO NOT function in the FLOOR setting. - 36 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
- 36 -
Dirt Sensor
➢
The dirt sensor light system is mounted
on the
POWER NOZZLE
near the reset
button. It consists of a series of three
red lights and one green light.
➢
The lights give you an indication of the
amount of dirt particles that are passing
through the sensor on its way to the
dust bag.
INITIAL START UP
➢
When the
POWER NOZZLE
is first
started, the following light sequence
occurs in a two second time frame:
1. All three reds come on.
2. Two reds are on.
3. One red is on.
4. One green is on and will remain on
until the
POWER NOZZLE
is placed in
use.
NOTE: If the nozzle is on a surface that has
dirt on it, dirt will be picked up by the vacu-
um and one or more red lights might stay
on.
IN OPERATION
➢
When the
POWER NOZZLE
is being
moved back and forth on the floor, the
lights will change from one
configuration to another as more dirt or
less dirt is being vacuumed.
➢
As long as one or more red lights are on,
dirt is passing through the wand to
indicate that the surface still needs
cleaning.
➢
When the green light stays on as the
POWER NOZZLE
is moved back and
forth over an area, the sensor is not
seeing enough dirt to warrant further
cleaning of that area.
NOTE:
Dirt sensor lights DO NOT function
in the FLOOR setting.
Dirt Sensor
Détecteur de poussière
Detector de tierra