Panasonic NE-1252 Operating Instructions - Page 20
Installation Instructions for Stacking
![]() |
View all Panasonic NE-1252 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Instructions for Stacking Important 1. Disconnect the power cord from the wall socket before attempting installation. 2. For stacking installation, you must use the PANASONIC Joint Plate (sold separately). 3. The combination of the units for stacking is limited to only the following PANASONIC models: Models No. NE-1252, NE-1752, NE-1772, NE-2152 4. The maximum stacking height is the total heights of two units. preparation Be sure the oven cavity is empty. Be sure surfaces where ovens meet is clean and sanitized. installation 1. Stack the units and remove five screws (a) as shown in Fig.1. 2. Loosen the screw (b). 3. Projection on Joint Plate must face away from the oven. Place Joint Plate on the screw (b). 4. Attach and tighten five screws (a) and the screw (b). See Fig.2. 5. Ensure the top oven is at a safe and workable height. (b) Joint Plate Projection Joint Plate (a) Fig. 1 Projection Fig. 2 - 20 -
![](/manual_guide/products/panasonic-ne1252-operating-instructions-2dd8bfc/20.png)