Panasonic NE-1252 Operating Instructions - Page 9

How to Operate POWER LEVEL SELECTOR PAD Each time the pad is pressed, the Power Level switches as the illustration below. P10 P9 P8 P7 P6 P5 P4 P3 P2 P1 P0 PU1 PU2 PL1 PL2 P10 again. HIGH MEDIUM HIGH MEDIUM P10: Models No. NE-1252 (1200 W), NE-1752 / NE-1772 (1700 W), NE-2152 (2100 W) P9: 95 % P8: 85 % LOW P3: 35 % HEAT FROM PU1: 50 % P2: 25 %* TOP DOWN PU2: 25 % P7: P6: 75 % 65 % DEFROST P1: 340 W HEAT FROM BOTTOM UP PL1: PL2: 50 % 25 % P5: 55 % - P0: 0 % P4: 45 % *: "LOW (P2)" for Model No. NE-1252 is 30%. A. MANUAL HEATING - single stage heating - Example: To cook food at HIGH power for 2 minutes PAD INSTRUCTION DIGITAL DISPLAY WINDOW 1 Place food inside the oven and close the door. The oven lamp will turn on and "0" will appear. Note: While "0" appears, operation is available. 1 minute after the door is closed, "0" will disappear. 2 Press Power Level Selector pad once. The selected power level will be indicated and 1st Stage Heating Indicator "1" will start to blink. Note: Each time the pad is pressed, the Power Level switches as the above Power Level Selector pad illustrates. 3 Press Number/Memory pads "2", "0" and "0". The set heating time will appear. Note: The maximum set time for "DEFROST" and "P0" is 30 minutes, and 15 minutes for all others. 4 Press Start pad. The oven lamp will turn on and heating will start. During operation, the indicator appears from the left and heating time will count down. • When all time expires, beep tone will sound and heating will stop. The oven lamp will turn off. "0000" will blink until the door is opened. 1 minute later, cooling fan will stop. • Open the door and take the food out. The oven lamp will turn on. Digital Display Window will show the originally selected time and power stage. • Close the door. The oven lamp will turn off. 1 minute later, Digital Display Window will go blank. - 9 -