Panasonic PVGS36 PVGS36 User Guide - Page 57

Warning/Alarm Indications If any one of the following indications lights up or flashes, please check the Camcorder. Confirmatory Indications : A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted. No cassette is inserted. [--] / : : The built-in battery is low. (p. 16) The Warning/Alarm Indication appears when you record yourself. Turn the LCD Monitor towards the Viewfinder and check the Warning/Alarm Indication. : No card is inserted. END : The tape came to the end during recording. : The video heads are dirty. (p. 59) Textual Indications DEW DETECT/ EJECT TAPE: Condensation has occurred. Take out the cassette and wait for a while. It takes some time until the cassette holder opens, but this is not a malfunction. (p. 59) TAPE END: The tape came to the end during recording. NEED HEAD CLEANING: The video heads are dirty. (p. 59) PUSH THE RESET SWITCH: An irregularity in the equipment has been detected. Press the [RESET] Button (p. 64). This may solve the problem. LOW BATTERY: The Battery is low. Recharge it. (pp. 11~12) NO TAPE: No tape is inserted. (p. 14) CHECK REC TAB: You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position. You are attempting Audio Dubbing or Digital Dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position. WRONG TAPE FORMAT: You are attempting to play back a tape section that has been recorded with a different TV system. This cassette is incompatible. CLOSE CASSETTE DOOR: The cassette cover is open. Close the cassette cover. (p. 14) COPY PROTECTED: Images cannot be recorded correctly because the medium is protected by a copy guard. CARD ERROR: The Card is not compatible with this Camcorder. You are attempting to format a failed card. It displays, when you attempt to insert the incompatible card to Card Slot. NO CARD: No card is inserted. CARD FULL: Card does not have sufficient memory remaining. Select Picture Playback Mode and delete unnecessary files. NO DATA: There are no recorded files on the card. UNPLAYABLE CARD: You are attempting to play back data not compatible with this Camcorder. FILE LOCKED: You are attempting to erase protected files. CARD LOCKED: The write protection switch on the SD Memory Card is set to [LOCK]. CHANGE MODE TO USE USB: The USB Cable is connected to the Camcorder in Card Recording Mode. CANCEL MAGICPIX MODE: You are attempting to select an item other than [OFF] in [ SCENE MODE] during MagicPix Mode. DISCONNECT USB CABLE: You are attempting to turn the Mode Dial in PC Mode with the USB Cable connected to the Camcorder. You are attempting to record pictures on a Tape/Card with the USB Cable connected to the Camcorder. PC DOES NOT SUPPORT USB2.0: The Camcorder is connected to a personal computer that does not support USB2.0. CAN NOT USE USB: You are connecting the USB Cable with the DV Cable connected. CHANGE TO MANUAL MODE: You are attempting to select an item other than [OFF] in [ SCENE MODE] when the [AUTO/ MANUAL/FOCUS] Switch is set to [AUTO]. TURN OFF THE VIDEO LIGHT: You are attempting to select an item in [ SCENE MODE] when Light is on. REVERSE THE LCD MONITOR: When the LCD Monitor is rotated by 180° towards the lens, the brightness of the LCD Monitor cannot be adjusted. Others 57