Panasonic SAAK960 Cd Stereo System - Page 12
FM/AM radio
View all Panasonic SAAK960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH DANSK FM/AM radio Manual tuning Memory preset 1 Press [TUNER / BAND] to select "FM" or "AM". 2 Press [PLAY MODE] to select "MANUAL". 3 Press [4, / REW] or [¢, / FF ] to select the frequency of the required station. " ST " is displayed when a stereo FM broadcast is being received. To tune automatically Press and hold [4, / REW ] or [¢, / FF ] until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may be interrupted when there is excessive interfer- ence. • To cancel auto tuning, press [4, / REW ] or [¢, / FF ] once again. To improve the sound quality Press and hold [PLAY MODE] to display "MONO". To cancel Press and hold [PLAY MODE] again until "MONO" disappears. • MONO is also canceled if the frequency is changed. • Turn off "MONO" for normal listening. FM allocation setting By main unit only This system can also receive FM broadcasts allocated in 0.1 MHz steps. To change the step to 0.1 MHz 1 Press and hold [TUNER/BAND]. After a few seconds the display changes to a flashing display of the current minimum frequency. 2 Continue to hold down [TUNER/BAND]. • When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. • After changing the setting, previously preset frequency will be cleared. 20 FM and 15 AM stations can be preset. Preparation Press [TUNER / BAND] to select "FM" or "AM". Automatic presetting 1 Tune to the frequency where presetting is to begin. 2 Press and hold [PROGRAM] to start presetting. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. Manual presetting 1 Press [PLAY MODE] to select "MANUAL". 2 Press [4, / REW] or [¢, / FF] to tune to the required station. 3 Press [PROGRAM]. 4 Press the numeric buttons to select a channel. For channels 10 to 20 press [h10], then the two digits. The station occupying a channel is erased if another station is preset to that channel. Selecting a preset station Press the numeric buttons to select the channel. OR 1 Press [PLAY MODE] to select "PRESET". 2 Press [4, / REW] or [¢, / FF] to select the channel. FRANÇAIS LANG - 4 LANG - 5 RQTX0169 12 RQT8043 RQTX0169-P.indd 12 7/18/08 9:24:59 AM