Panasonic SAAK960 Cd Stereo System - Page 14

Timer (continued) To activate the timer 5 Press and hold [- ˚PLAY/REC] to turn on your desired timer. ˚ PLAY ˚ REC no display (off) 6 Press [y] to turn off the unit. The unit must be off for the timers to operate. Sound adjustment Selecting sound effects Preset EQ Press [PRESET EQ] repeatedly to select your desired setting. HEAVY SOFT CLEAR VOCAL FLAT (off) ENGLISH DANSK FRANÇAIS Other basic operations To change the settings change the source or volume check the settings cancel Action Repeat steps 1 to 4 and 6 (\ see page 13 and above). 1) Press and hold [- ˚PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Perform steps 5 to 6 (\ see above). Press and hold [- CLOCK/TIMER] repeatedly to select ˚PLAY or ˚REC. Press and hold [- ˚PLAY/REC] to clear the timer indicators from the display. If you use the unit after the timers are set After using, check that the correct tape/disc are loaded before turning the unit off. Note: • The play timer will start at the preset time with volume increasing gradually to preset level. • The record timer will start 30 seconds before the set time with the volume muted. • The timer comes on at the set time everyday if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, just activate the equipment's play mode and increase the volume. (See the portable audio equipment's instruction manual.) Using the sleep timer This function enables you to turn off the unit automatically after the set time. Press [SLEEP] to select your desired time. SLEEP 30 SLEEP 60 SLEEP 90 SLEEP OFF SLEEP 120 Sleep timer indicator To cancel Press [SLEEP] to select "SLEEP OFF". Changing the remaining time Press [SLEEP] to show the remaining time and press [SLEEP] again to select your desired time. Note: • The play and sleep timer or the record and sleep timer can be used together. • The sleep timer always has priority. Be sure not to overlap timer set- tings. • The sleep timer turns off when you perform the record function. Setting HEAVY SOFT CLEAR VOCAL FLAT Effect Adds punch to rock For background music Clarifies higher frequencies Adds gloss to vocal No effect Manual EQ 1 Press [MANUAL EQ] repeatedly to select your desired setting. BASS MID TREBLE Setting BASS MID TREBLE Effect For lower pitch sound For middle pitch sound For higher pitch sound 2 Press [4, / REW ] or [¢, / FF] to adjust the level. OR Press [+] or [-] on the main unit to adjust the level. Note: • The level of the pitch is between -3 to +3. • The changes you make are stored and automatically recalled the next time you select "MANUAL EQ". Enhancing the bass sound You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal. To activate Press [HARD BASS]. To cancel Press [HARD BASS] again. Note: The actual effect depends on the disc. LANG - 4 LANG - 5 RQTX0169 14 RQT8043 RQTX0169-P.indd 14 7/18/08 9:25:01 AM