Panasonic SAAK960 Cd Stereo System - Page 19

ENGLISH DANSK Specifications AMPLIFIER SECTION RMS output power Front Ch 200 W per channel (7 Ω), 1 kHz, 10% THD Subwoofer Ch 240 W per channel (7 Ω), 100 Hz, 10% THD Total RMS Dolby Digital mode power 880 W FTC Output Power Stereo Mode Front Ch (both ch driven) 190 W per channel (7Ω), 100 to 12 kHz. 10% THD Subwoofer Ch 220 W per channel (7Ω), 40 to 100 Hz, 10% THD Total FTC Stereo mode power 820 W FM/AM TUNER, TERMINALS SECTION Preset station FM 20 stations AM 15 stations Frequency Modulation (FM) Frequency range 87.9 to 107.9 MHz (200 kHz step) 87.5 to 108.0 MHz (100 kHz step) Sensitivity 4.0 µV (IHF) S/N 26 dB 2.2 µV Antenna terminal(s) 75 Ω (unbalanced) Amplitude Modulation (AM) Frequency range 520 to 1710 kHz (10 kHz step) Phone jack Terminal Stereo, 3.5 mm (1/8˝) jack MIC jack Sensitivity 0.7 mV, 1.2 kΩ Terminal Mono, 3.5 mm (1/8˝) jack (1 system) Music Port (Front) Sensitivity 100 mV, 4.7 kΩ Terminal Stereo, 3.5 mm (1/8˝) jack USB Port USB standard USB 2.0 full speed Media file format support MP3 (*.mp3) USB device file system FAT12, FAT16, FAT32 USB port power 500 mA (Max) CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erase system AC erase 100 kHz Tape speed 4.8 cm/s (1-7/8 ips) Overall frequency response (+3 dB, -6 dB) at DECK OUT Normal 35 Hz to 14 kHz S/N Ratio 50 dB (A-WTD) Wow and flutter 0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape DISC SECTION Disc played [8 cm (3˝ ) or 12 cm (5˝ )] (1) CD-Audio (CD-DA) (2)CD-R/RW (CD-DA, MP3* formatted disc) (3) MP3* * MPEG-1 Layer 3, MPEG-2 Layer 3 Pick up Wavelength 785 nm Laser power CLASS 1 Audio output (Disc) Number of channels (FL, FR, SL, SR, SW) 4.2 ch Audio performance (measurement at: CD out terminal) Frequency response (CD-Audio) 4 Hz to 20 kHz S/N ratio (CD-Audio) 95 dB Dynamic range (CD-Audio) 93 dB Total harmonic dist. (CD-Audio) 0.005% SPEAKER SECTION Front speakers (SB-PF960) * Rating with low-cut filter equipped amplifier Type Speaker unit(s) 1. Woofer 2. Tweeter Input power (IEC) 2 way, 2 speaker system (Bass reflex) Impedance 7 Ω 20 cm (77/8˝) cone type 6 cm (23/8˝) cone type 220 W (Max) Output sound pressure 88 dB/W (1.0 m) Cross over frequency 4 kHz Frequency range Dimensions (WxHxD) Mass 60 Hz to 24 kHz (-16 dB) 69 Hz to 23 kHz (-10 dB) 250 x 411 x 338 mm (97/8˝ x 163/6˝ x 135/16˝) 5.8 kg (12.8 lb) Surround speakers (SB-PS960) * Rating with low-cut filter equipped amplifier Type Speaker unit(s) 1. Woofer 2. Tweeter Input power (IEC) 2 way, 2 speakers system (Bass reflex) Impedance 8 Ω 12 cm (43/4˝) cone type 6 cm (23/8˝) cone type 125 W* (Max) Output sound pressure 85 dB/W (1.0 m) Cross over frequency 4 kHz Frequency range 60 Hz to 26 kHz (-16 dB) Dimensions (WxHxD) Mass 71 Hz to 23 kHz (-10 dB) 196 x 341 x 226 mm (73/4˝ x 137/16˝ x 815/16˝) 2.8 kg (6.2 lb) Subwoofer 1 (SB-WAK860) Subwoofer 2 (SB-WAK960) Type Speaker unit(s) 1. Woofer Input power (IEC) Output sound pressure Frequency range Dimensions (WxHxD) Mass 1 way, 1 speaker system (Bass reflex) Impedance 7 Ω 25 cm (10˝) cone type 250 W (Max) 82 dB/W (1.0 m) 48 Hz to 250 Hz (-16 dB) 50 Hz to 200 Hz (-10 dB) 320 x 411 x 330 mm (125/8˝ x 163/16˝ x 13˝) SB-WAK860 7.4 kg (16.3 lb) SB-WAK960 7.3 kg (16.1 lb) GENERAL Power supply AC 120 V, 60 Hz Power consumption 240 W Dimensions (WxHxD) 250 x 331.5 x 358 mm (97/8˝ x 131/16˝ x 141/8˝) Mass 8.3 kg (18.3 lb) Operating temperature range 0°C to +40°C (+32°F to +104°F) Operating humidity range 35% to 80% RH (no condensation) Power consumption in standby mode: 0.2 W (Approx.) Note: 1. Specifications are subject to change without notice. Weight and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. FRANÇAIS LANG - 4 LANG - 5 RQTX0169 RQTX0169-P.indd 19 19 RQT8043 7/18/08 9:25:13 AM