Panasonic SCPM25 SAPM25 User Guide - Page 10

Listening Operations, The Radio: Manual Tuning, Press [tuner/band] To Select Fm

Page 10 highlights

Listening operations 1 3 2 5 4 1 POWER 2 TUNER/BAND MHz 3 TUNE MODE 4 4/REW/g 3/FF/f TUNED ST MHz 5 VOLUME DOWN UP A CLOCK AUTO OFF SLEEP TIMER 1 2 3 PLAY REC 4 5 6 10 7 8 9 0 TUNE MODE PROGRAM CANCEL PLAY MODE SELECTOR TUNER TAPE CD CLEAR REW FF dB TUNE MODE TUNED MONO MHz The radio: manual tuning 1 Press [POWER ] to turn the unit on. 2 Press [TUNER/BAND] to select "FM" or "AM". Every time you press the button: FM W AM 3 Press [TUNE MODE] on the remote control to select "MANUAL". Every time you press the button: MANUAL W PRESET 4 Press [4/REW/ g] or [3/FF/ f] to select the frequency of the required station. "TUNED" is displayed when a radio station is tuned. "ST" is displayed when a stereo FM broadcast is being received. 5 Adjust the volume. Auto tuning Press and hold [4/REW/ g] or [3/FF/ f] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may not function when there is excessive interference. • To cancel auto tuning, press [4/REW/ g] or [3/FF/ f] once again. A If noise is excessive in FM by remote control only Press and hold [TUNE MODE] to display "MONO". This mode improves sound quality if reception is weak, but broadcasts will be heard in monaural. Press and hold [TUNE MODE] again to cancel the mode. "MONO" goes out. MONO is also canceled if the frequency is changed. Turn off "MONO" for normal listening. Stereo and monaural broadcasts are automatically played as they are received. FM allocation setting Main unit only By adjusting the allocation, you can enable this tuner to receive FM broadcasts allocated in 0.1 MHz steps. Press and hold [TUNER/BAND]. After a few seconds, the display will change to a flashing display of the current minimum FM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time. To return to the original frequency indication, repeat above. Note • After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. • Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast. 10 RQT5717

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

RQT5717
10
Listening operations
1
2
3
4
5
A
3
2
5
4
TUNER/BAND
TUNE MODE
VOLUME
DOWN
UP
TUNE MODE
4
/REW/
g
3
/FF/
f
1
2
3
4
5
6
7
9
0
10
CANCEL
AUTO OFF
SLEEP
8
PROGRAM
TUNE MODE
PLAY MODE
SELECTOR
TAPE
TUNER
CD
CLOCK
TIMER
PLAY
REC
REW
CLEAR
FF
1
POWER
MHz
ST
TUNED
MHz
dB
MONO
TUNED
MHz
The radio: manual tuning
1
Press [POWER
] to turn the unit on.
2
Press [TUNER/BAND] to select “FM”
or “AM”.
Every time you press the button:
FM
W
AM
3
Press [TUNE MODE] on the remote
control to select “MANUAL”.
Every time you press the button:
MANUAL
W
PRESET
4
Press [
4
/REW/
g
] or [
3
/FF/
f
] to
select the frequency of the required
station.
“TUNED” is displayed when a radio station is tuned.
“ST” is displayed when a stereo FM broadcast is being
received.
5
Adjust the volume.
Auto tuning
Press and hold [
4
/REW/
g
] or [
3
/FF/
f
] for a moment until the
frequency starts changing rapidly. The unit begins auto tuning,
stopping when it finds a station.
• Auto tuning may not function when there is excessive interference.
• To cancel auto tuning, press [
4
/REW/
g
] or [
3
/FF/
f
] once
again.
If noise is excessive in FM
by remote control only
Press and hold [TUNE MODE] to display “MONO”.
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [TUNE MODE] again to cancel the mode.
“MONO” goes out. MONO is also canceled if the frequency is
changed.
Turn off “MONO” for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
FM allocation setting
Main unit only
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER/BAND].
After a few seconds, the display
will change to a flashing display of the current minimum FM
frequency. If you continue to hold the button down, the minimum
frequency will change.
Release the button at this time.
To return to the original frequency indication, repeat above.
Note
• After changing the “allocation” setting, the frequencies you
previously preset in the memory will be cleared.
• Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
A