Panasonic SCPM25 SAPM25 User Guide - Page 19

A 1 1 SELECTOR 2 CD EDIT 3 4 REC B 1 1 SELECTOR 2 CD EDIT 3 REW FF 4 REC 2 4 3 TUNED ST MONO kHz MHz dB PRGM AUTO side to be recorded facing up 2 4 3 TUNED ST MONO kHz MHz dB PRGM AUTO 1 - 1-REC PLAY RANDOM REV REC FWD Recording CDs You can record the whole CD (AUTO-REC) or a selected track (1REC). If a track is interrupted at the end of the side facing up, it is recorded again on the side facing down. A Auto editing recording (AUTO-REC) Recording begins from the side facing up and the reverse mode is set to " ". Preparation: Insert a CD (\ page 12) 1 Press [SELECTOR] to switch to CD mode. 2 Press [CD EDIT] so "AUTO-REC" is displayed. Every time you press the button: AUTO-REC 1-REC OFF 3 Insert the tape with the exposed tape facing left. 4 Press [[REC/ J] to start recording. The unit rewinds the tape, records 10 seconds of silence, and then starts recording. To stop recording Press [STOP L]. The CD also stops. To record selected tracks. 1 Program tracks (\steps 1 to 3 on page 14). 2 Do steps 2 to 4 above. Note Auto edit recording cannot be used with random and repeat play. (\ page 13). B One track edit recording (1-REC) Preparation: Insert a CD (\ page 12) and a cassette. Wind the tape to where you want to start recording. 1 Press [SELECTOR] to switch to CD mode. 2 Press [CD EDIT] so "1-REC" is dis- played. 3 Press [4/REW/ g] or [3/FF/ f] to select the track you want to record. 4 Press [[REC/ J] to start recording. CD play and recording start at the same time. To stop recording Press [STOP L]. The CD also stops. To continue recording from another CD 1 Press [OPEN/CLOSE c] and insert the other CD. 2 Do steps 3 and 4. To record a track while it is being played. 1 Press [CD EDIT] so "1-REC" is displayed. 2 Press [[REC/ J]. Recording starts from the beginning of the track and stops when the track finishes. 19 RQT5717 Recording operations