Panasonic SCPM25 SAPM25 User Guide - Page 16
Recording Operations, Before Recording
View all Panasonic SCPM25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Listening operations Recording operations A FWD B PLAY FWD C Side A Tab for side B Tab for side A To re-record Normal tape High position tape Discrimination hole D 4 3 Cassette tapes A To fast-forward or rewind the tape Press [4/REW/ g] or [3/FF/ f] in the stop mode. To rewind To fast-forward 4/REW/ g 3 /FF/ f B To find the beginning of a program (TPS: Tape Program Sensor) Press [4/REW/ g] or [3 /FF/ f] during play. Press the button once for each track to be skipped (up to 9 tracks). Backward 4/REW/ g Forward 3 /FF/ f Note TPS searches for silent parts of about 4 seconds normally found between tunes. As a result, it may not function properly in the following cases. • With short silent parts. • When noise occurs between tunes • With silent parts found within tunes Before recording Types of tapes which can be recorded correctly The system automatically identifies the type of tape. NORMAL POSITION/TYPE I HIGH POSITION/TYPE II METAL POSITION/TYPE IV ! This system cannot correctly record or erase metal position tapes. C Erasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown, being careful not to cover the high position discrimination hole. The effect of volume, sound quality, and sound virtualizer on recording. These have no effect on recording. They can be changed for playback. D To erase a recorded sound 1Press [STOP L]. 2Press [REV MODE] on the remote control to select the reverse mode. 3Insert the cassette with the exposed tape facing left. Tape direction is automatically set to " FWD ". 4Press [[REC/ J]. 1 2 16 RQT5717