Panasonic TH42PX20U 50" Hdtv Plasma Display - Page 55

Adjusting PICTURE POSITION/SIZE PC MENU Adjusting screen 1 Select PICTURE POS./SIZE from the "PC MENU" during PC input signal. 2 CH CTIO A N VOL VOL Press to select H-POS/H-SIZE/V-POS/ V-SIZE/CLOCK PHASE. CH During "RGB" input signal. PICTURE POS./SIZE NORMALIZE NORMAL H-POS H-SIZE V-POS V-SIZE CLOCK PHASE 3 CH CTIO A N VOL VOL CH Press to adjust POS./SIZE. H-POS When the Position Left " " button is pressed Note: If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the PICTURE POS./ SIZE function. When the Position Right " " button is pressed H-SIZE When the Position Left " " button is pressed When the Position Right " " button is pressed V-POS When the Position Left " " button is pressed When the Position Right " " button is pressed V-SIZE When the Position Left " " button is pressed When the Position Right " " button is pressed CLOCK PHASE Flickering and distortion can be eliminated by using the Position Left " " or Right " " button to (RGB/PC in Mode) carry out adjustment. Helpful Hint ( NORMALIZE Normalization) While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 55