Panasonic TX-P42X50B Operating Instructions - Page 10

Quick Start Guide Identifying Controls Indicator / Control panel 1 2 3 4 5 67 Rear side of the TV 1 Function select ● [Volume] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass]∗ / [Treble]∗ / [Balance] / [Auto Setup] (p. 38) ∗[Music] or [Speech] mode in the Sound Menu 2 Channel Up / Down, Value change (when using the F button), Switching the TV on (press either button for about 1 second when in Standby mode) 3 Changes the input mode 4 Mains power On / Off switch ● Use to switch the mains power. If you turned the TV off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV on with Mains power On / Off switch. When pressing the control panel button (1 - 4), the control panel guide appears on the left side of the screen for 3 seconds to highlight the pressed button. 5 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. 6 C.A.T.S. (Contrast Automatic Tracking System) sensor ● Senses brightness to adjust picture quality when [C.A.T.S.] in the Picture Menu is set to [On]. (p. 29) 7 Power and Timer LED Red: Standby Green: On Orange: Timer Programming On Orange (flash): Recording of Timer Programming or Direct TV Recording in progress Red with orange flash: Standby with Timer Programming On or Direct TV Recording ● The LED blinks when the TV receives a command from the remote control. Using the On Screen Displays - Operation guide Many features available on this TV can be accessed via the On Screen Display menu. ■ Operation guide ■ How to use remote control Operation guide will help you to operate by using the remote control. Example: [Owner ID] Owner ID Please enter new PIN PIN * * * * Open the main menu Move the cursor / select the menu item (up and down only) / adjust levels (left and right only) / select from a range of options (left and right only) EXIT 0 RETURN 9 PIN entry Access the menu / store settings after adjustments have been made or options have been set Operation guide Return to the previous menu Exit the menu system and return to the normal viewing screen Auto power standby function The TV will automatically go into Standby mode in the following conditions: • No signal is received and no operation is performed for 30 minutes in Analogue TV mode. • [Off Timer] is active in the Setup Menu. (p. 17) • No operation is performed for the period selected in [Auto Standby] (p. 34). ● This function does not affect the recording of Timer Programming and Direct TV Recording. 10