Panasonic TX-P42X50B Operating Instructions - Page 8
Preventing the TV from falling over
View all Panasonic TX-P42X50B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Quick Start Guide Accessories / Options Assembly screw (4) (silver) ● XYN5+F18FN M5 × 18 Assembly screw (4) (black) ● THE3DL001N M5 × 30 Pole (2) ● R: TBL5ZA3311 ● L: TBL5ZA3310 R L Base ● TBL5ZX0343 (TX-P42X50B) ● TBL5ZX0341 (TX-P50X50B) ■ Assembling the pedestal Use the assembly screws to fasten the poles to the base securely. ● Make sure that the screws are securely tightened. ● Forcing the assembly screws the wrong way will strip the threads. ● "L" or "R" mark is stamped on the bottom of the pole. A A ■ Securing the TV Use the assembly screws to fasten securely. ● Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely. ● Carry out the work on a horizontal and level surface. C-R C- L Arrow mark D B Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV. 1 Remove the assembly screws from the TV. 2 Pull out the pedestal from the TV. 3 Remove the assembly screws from the poles. Preventing the TV from falling over Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation surface. ● The place where the pedestal is to be fixed should be thick enough and made of hard material. Screw (not supplied) Diametre: 3 mm Length: 25 - 30 mm Screw hole 8