Panasonic TX-P42X50B Operating Instructions - Page 30

Advanced Settings Picture How to Use Menu Functions Menu Item Side Panel 16:9 Overscan DVI Input Setting Pixel Orbiter Scrolling Bar Reset to Defaults Mode Sound Bass Treble Equaliser 30 Adjustments / Configurations (alternatives) Adjusts the brightness of the side panel [Off] / [Low] / [Mid] / [High] ● The recommended setting is [High] to prevent panel "image retention". Selects the screen area displaying the image [Off] / [On] [On]: Enlarges the image to hide the edge of the image. [Off]: Displays the image in the original size. ● Set to [On] if noise is generated on the edge of the screen. ● This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9]. ● This function can be memorised separately for SD (Standard definition) and HD (High definition) signals. Changes the black level of the image for HDMI input mode with DVI input signal manually [Normal] / [Full] ● When the DVI input signal from the external equipment (especially from PC) is displayed, the black level may not be suitable. In this case, select [Full]. ● The black level for HDMI input signal will be adjusted automatically. ● For HDMI input mode with DVI input signal Selects the mode for wobbling of the image to prevent panel "image retention" [Auto] / [On] [Auto]: Automatically works only for the appropriate images and you rarely recognise the wobbling. Displays scrolling bar pattern to assist elimination of panel "image retention" ● Press the OK button to start scrolling and press any buttons (except Standby) to exit this mode. ● For positive effect to eliminate "image retention", it may be necessary to display for a long time. Press the OK button to reset the current Picture Viewing Mode to the default settings Selects your favourite sound mode [Music] / [Speech] / [User] ● The selected mode affects all input signals. [Music]: Improves sound quality for watching music videos, etc. [Speech]: Improves sound quality for watching news, drama, etc. ● In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those settings will be stored for each mode. [User]: Adjusts the sounds manually by using the equaliser to suit your favourite sound quality. ● For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency. [Equaliser] (see below) Adjusts level to enhance or minimise lower, deeper sound output Adjusts level to enhance or minimise sharper, higher sound output Adjusts the frequency level to suit your favourite sound quality ● This function is available when [Mode] is set to [User]. ● Select the frequency and change the frequency level by using the cursor button. ● To enhance the bass sound, raise the level of the lower frequency. To enhance the treble sound, raise the level of the higher frequency. ● To reset the levels of each frequency to the default settings, select [Reset to Defaults] by using the cursor button, and then press the OK button.