Panasonic TY-TP50P10S Operating Instructions - Page 20

Touch Panel Setup How to Use the Driver Software ■ Driver Software Startup The Driver software starts up automatically when the computer starts up. Below is explained the procedure for manually starting up the Drive software. The Driver software can be started up in two ways. Method 1 Double-click on the "LSaDrv Driver" icon on the desktop. The Driver software starts up. Method 2 Select [Start] → [All programs] → [LSaDrv] → [LSaDrv Driver]. The Driver software starts up. When the Driver software starts up, the icon will appear at the bottom right-hand corner of the screen. When running When cable is disconnected (If the USB cable is disconnected, an X appears over the icon.) The touch panel works only when the touch panel and computer are connected over a USB cable. Note The touch panel may not respond smoothly for a while after the Driver software starts up. ■ Control Panel Startup There are two ways to start up the setup panel. Method 1 Click on the icon in the task tray and select "Control Panel" from the menu that appears. The setup panel starts up. Method 2 Select [Start] → [All Programs] → [LSaDrv] → [LSaDrv Control Panel]. The setup panel starts up. ■ Exit Driver Software Click on the icon in the task tray and select "Exit driver" from the menu that appears. 20