Panasonic TY-TP50P10S Operating Instructions - Page 44

Specifications Model Number TY-TP42P10S TY-TP50P10S TY-TP58P10S TY-TP65P10S Type Touch Panel Power source Touch panel Voltage Electric current Supply system Detection system Panel window Detection range Effective detection range Resolution Output system Optic element pitch Minimum detection size Response rate +5V DC±10% Max. 450 mA From USB bus Infrared retroreflective detection 938 mm (W) × 535 mm (H) 1,128 mm (W) × 648 mm (H) 1,305 mm (W) ×747.5 mm (H) 1,449 mm (W) × 819 mm (H) 920 mm (W) × 518 mm (H) 1,106 mm (W) × 622 mm (H) 1,287 mm (W) ×723.5 mm (H) 1,434 mm (W) × 807 mm (H) Same as above Same as above Same as above Approx. 32,000 x 18,000 points *1 Coordinate output Same as above Infrared LED x 4, CMOS image sensor x 2 7 mm 8 mm 9 mm 100 points / sec USB 2.0 full speed device 10 mm Interface Signals: +DATA, -DATA, VCC, GND Connector: Type B Temperature When operating: 0 ~ 40˚C *2 Humidity When operating: 20 ~ 80% (No dewing) *2 Resistance to external light External dimensions Mass Escutcheon material Lateral light 2,000 lx + 20% (20˚ angle of incidence) Frontal light 10,000 lx + 20% (90˚ angle of incidence) 1,016.4 mm (W) × 686 mm (H) × 47.9 mm (D) Approx. 4.1 kg 1,206.4 mm(W) × 798.6 mm (H) × 47.9 mm (D) Approx. 4.6 kg 1,395.4 mm (W) × 923.1 mm (H) × 47.9 mm (D) Approx. 5.8 kg 1,550.8 mm(W) × 1,008.2 mm (H) × 47.9 mm (D) Approx. 6.7 kg Aluminum *1 Resolution obtained by using a dedicated Driver software *2 When the panel is attached to a Plasma display produced by Panasonic Corporation. 44