Panasonic U1 Panaboard - Page 31
Replacing the Battery for the unit clock
UPC - 092281895208
View all Panasonic U1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Replacing the Battery for the unit clock When the clock battery has been drained, the time setup screen is displayed each time the unit's power is turned on. Replace the battery as follows and set the current time (see page 20). 1 Loosen the screw attached to the lower side of the Control Panel 1, then remove the battery holder 2. 2 1 Screw Caution • Do not loosen any other screws. 2 Remove the old battery and install the new one with the positive ("+") terminal upward. • Always use "CR2032" batteries and be sure that the battery is inserted as indicated on the battery holder. Old battery CR2032CRP2a0n3a2sonic PS New battery 3 Set the battery holder with the battery side upward and retighten the screw in step 1. Daily Care and Maintenance For U.S.A This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate For Brasil Após o uso as pilhas / baterias contidas neste produto poderão ser dispostas em lixo doméstico. For Netherlands Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg ziju, moet u ze niet weggooien maar inleveren als KCA. For Taiwan ( 台灣 ) Help 4 Turn the power on and set the current time. (See page 20.) 31