Panasonic VS2 Operating Instructions - Page 28
Charging the battery
![]() |
View all Panasonic VS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Getting Started Charging the battery Your phone can be charged either when it is switched on or off. You can use your phone even while it is charging. Ensure that the battery is inserted into the phone before charging. 1. Open and hold the connector cover. Connect the charger to Charging Connector, then connect the charger to the mains power supply. 2. When charging is complete, disconnect the charger from the outlet before removing the plug from the phone. Then hold the connector cover and press and hold the release buttons on both sides of the connector's end and pull gently to disconnect the charger from the phone. After you have removed the Charging Connector, replace the connector cover over the socket. Note: DO NOT force the connector as this may damage the phone and/or the charger. If the battery has been deeply discharged, it may take several minutes before the Battery charge level indicator is displayed. 25
![](/manual_guide/products/panasonic-vs2-operating-instructions-1d0a322/28.png)