Panasonic WJ-GXE100 Installation Guide - Page 9

Precautions Refer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. Stop the operation immediately when something is wrong with this product. When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, accidents, or damage to the product. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble or modify this product. Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. Do not insert any foreign objects. Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit. Turn the power off immediately and contact qualified service personnel for service. Select an installation area that can support the total weight. Selecting an inappropriate installation surface may cause the product to fall down or topple over, resulting in injury. Installation work shall be started after sufficient reinforcement. Periodic inspections shall be conducted. Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents. Consult the dealer for the inspections. Do not use this product in an inflammable atmosphere. Failure to observe this may cause an explosion resulting in injury. Avoid installing this product in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of this product may occur. Do not install this product in locations subject to vibration. Loosening of mounting screws or bolts may cause a fall of the product resulting in injury. Install this product in a location high enough to avoid people and objects from bumping the product. Failure to observe this may cause a drop resulting in injury or accidents. Do not strike or give a strong shock to this product. Failure to observe this may cause fire or injury. Turn the power off when wiring this product. Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire. Do not rub the edges of metal parts with your hand. Failure to observe this may cause injury. The screws and fixed parts must be securely tightened. Failure to observe this may cause the product to fall resulting in injury. Do not touch this product, the power cord or the connected cables during thunder (even in the process of work). Failure to observe this may cause electric shock. Do not damage the power cord. Do not damage, fabricate, twist, stretch, bundle, or forcibly bend the power cord. Do not place heavy objects. Keep away from heat sources. Use of the damaged power cord may cause electric shock, short circuit, or fire. Consult the dealer for repair. 9