Panasonic WJ-GXE500 Installation Guide - Page 25

Configure the network settings Install the software Before installing the software, refer to the readme file on the provided CD-ROM first. Software included on the provided CD-ROM • Panasonic IP setting software Configure the network settings of the unit. Refer to the following for further information. • Viewer Software "Network Camera View 4" It is necessary to install the viewer software "Network Camera View 4" to display images on a PC. Install the viewer software by double-clicking the "nwcv4setup.exe" icon on the provided CD-ROM. Configure the network settings of the unit using the Panasonic IP setting software It is possible to perform the network settings of the unit using the IP setup software on the provided CD-ROM. When using two or more units, it is necessary to configure the network settings of each unit independently. If the Panasonic IP setting software does not work, perform the network settings of the unit and the PC individually on the "Network" page of the setup menu. Refer to the Operating Instructions (PDF) for further information. Important: • When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert" window may be displayed when starting the IP setup software. In this case, disable "User Account Control" from the control panel. • For the security enhancement, the MAC address/IP address of the unit to be configured will not be displayed when around 20 minutes have passed after turning on the power of the unit. (when the effective period is set to "20 minutes" in the IP setup) • Panasonic IP setting software is inoperable in other subnets via the same router. • This unit cannot be displayed or set with an older version of the IP setup software (version 2.xx). 25