Panasonic WJ-NV300 Operating Instructions - Page 21
Change the registered information [Registered information], Camera], Model], Address], Compression] - default password
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Change the registered information [Registered information] Click the [Setup >] button for "Registered information" on the [Camera registration] tab to display the following items. After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab. [Camera] Up to 32 cameras can be connected. By registering the license for additional cameras, the number of cameras can be increased up to 16, 24, or 32. (Default: 16 for WJ-NV300K, 9 for WJ-NV300/G.) [Model] The model of a registered camera will be displayed. (Blank: Camera is not registered) Click the [C] button to select the camera model from the camera categories. Refer to the "readme.txt" on the provided CD-ROM for camera categories. It is unnecessary to change it for normal use. [Address] An address already in use will be displayed. The address can be changed using the on-screen keyboard (☞ page 10). Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). Note: • Entering "http://" is not necessary if the host name is entered. [Compression] Select the image compression method. H.264/ MJPEG Note: • When selecting "MJPEG" for "Compression", the live image transmission rate and the frame rate will be changed automatically to "5 ips". (☞ Page 39) • When selecting "H.264" for "Compression", it will become possible to select "XF" for the image quality setting. • Depending on the model of the camera, the camera may reboot when the compression method is changed. The reboot will be detected as a communication error, but that is not a malfunction. [User name] Enter the user name for accessing the cameras and logging in using the on-screen keyboard (☞ page 10). Register the user name whose access level is "Administrator". [Password] Enter the password to be used for the user whose name has been registered as "User name" (☞ page 10). (Up to 32 alphanumeric characters) [Port No.] Set a port number from 1 - 65535 for use by the camera. Default: 80 [Table to delete] To delete registration information or remove a previously connected camera, either select the camera number and click the [Delete] button, or set the IP address of the respective camera to "000.000.000.000". Note: • Enter the port number in five digits, right aligned. (Example: When the port number is 80, enter "00080".) The leading zeros are omitted here. 21