Panasonic WJ-NV300 Operating Instructions - Page 55
Con the settings relating to the mail notification [e-Mail], Network Setup [PC port]
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Note: • Depending on the network settings, network com- munication may not be established if the HTTP port number has been changed. In this case, refer to the administrator of each network. • The following numbers and the FTP port number are unavailable for the HTTP port number. 20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 [FTP port number] Designate the FTP port number of the recorder. It is unnecessary to change it for normal use. 1 - 65535 Default: 21 Note: • The following numbers and the HTTP port number are unavailable for the FTP port number. 20, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 [Attach the alteration detection code (FTP)] Determine whether or not to attach the alteration detection code to the recorded images to be downloaded from an FTP server. Off: Does not attach the alteration detection code. On: Attaches the alteration detection code. Default: Off ■ Network Setup [PC port] Configure the network settings for the PC port of this product. [IP address] Default: 0.0.0.0 [Subnet mask] Default: 0.0.0.0 [Back] button Click this button after completing the settings. Configure the settings relating to the mail notification [e-Mail] The settings of alarm mail notice, the settings of error report mail (☞ page 179) and the settings to use the mail functions can be configured on this tab. [SMTP port number] Enter the port number of the SMTP server. 1 - 65535 Default: 25 [SMTP server address] Enter an IP address or a name of the SMTP server to send e-mails. The name of the SMTP server is available only when "Manual" is selected for "DNS" on the [Basic] tab accessed from the "Advanced setup" menu - the "Network" page of the setup menu. Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). [POP server address] Enter an IP address or name of the POP server to be used for POP before SMTP authentication. The name of the POP server is available only when "Manual" is selected for "DNS" on the [Basic] tab accessed from the "Advanced setup" menu - the "Network" page of the setup menu. Enter up to 255 alphanumeric characters including hyphens (-) and periods (.). [Authentic method] Select the authentication method to send e-mails from the following. None/ POP before SMTP/ SMTP Default: None 55