Panasonic WJ-NV300 Operating Instructions - Page 34
Set the back light compensation function of the camera [Back light compensation
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Set the back light compensation function of the camera [Back light compensation (BLC)] Determine whether to enable the back light compensation function for each camera. The settings will be changed after the settings have been transmitted to the camera. Clicking the [Setup >] button for "Back light compensation (BLC)" on the [Camera setup] tab will display the setup window. [Back light compensation (BLC)] When "On" is selected for "Super Dynamic", this function is not available. The back light compensation function masks the brighter area in image and compensates exposure in silhouette created by back light. On: Mask area will automatically be set. Off: Mask area will not be set automatically. It is necessary to set mask areas manually. ■ Camera Selection Select the camera to which the setting of the "Back light compensation (BLC)" is to be sent. Mark the checkbox of the camera to which the setup information is to be transmitted. [Transmission] button Transmit the setting of the "Back light compensation (BLC)" to the camera. Once transmission is completed and the setting has been applied to the camera, "OK" will be displayed in the "Results" field. If the display reads "Authentication error", etc., the camera connection or the setting may have failed. [Back] button Click the button after completing the settings. The screen returns to the [Camera setup] tab. 34