Panasonic WJ-NV300 Operating Instructions - Page 52
Con the settings relating to network [Network], Con the basic network settings [Basic
View all Panasonic WJ-NV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Configure the settings relating to network [Network] The settings relating to the network of the recorder are configured on the setup menu - the "Advanced setup" menu - the "Network" page. The "Network" page has [Basic], [e-Mail], [Panasonic alarm protocol] and [NTP/SNMP] tabs. Configure the basic network settings [Basic] The basic settings relating to the network can be configured on this tab. Note: • Enter the address octets and port numbers right-aligned. (Example: When the port number is 80, enter "00080".) The leading zeros are omitted here. ■ Network Setup [Camera/PC port] Configure the network settings of the recorder. [IP address] The IP address of the recorder will be displayed. To change the IP address, click the [D]/[C] button. Default: 192.168.0.250 [Subnet mask] Select the subnet mask in accordance with the recorder's network environment. Enter in the same way as the IP address. Default: 255.255.255.0 [Default gateway] Select the address for the default gateway in accordance with the recorder's network environment. Enter in the same way as the IP address. Default: 192.168.0.1 [Line speed] Specify the line speed for data transmission. Auto: Line speed will be applied automatically. 100M-Full: 100 Mbps full-duplex 100M-Half: 100 Mbps half-duplex 10M-Full: 10 Mbps full-duplex 10M-Half: 10 Mbps half-duplex Default: Auto Important: • When the setup menu is closed after changing the line speed, the recorder will automatically reboot. ■ DNS Setup The settings relating to DNS (Domain Name System) can be configured on this tab. [DNS] Determine whether or not to use the DNS. Off: Does not use the DNS. Manual: When using DNS, it is possible to search IP addresses by host name. Default: Off 52