Panasonic WV-LC1700 Operating Instructions - Page 15

Audio Volume Control By pressing the + or - button during picture display, you can adjust the audio volume level. While the + or - button is pressed, the volume level is displayed on the screen. -: Audio volume level goes down. +: Audio volume level goes up. Setting item AUDIO Effect Setting value +: Audio volume level goes up. 0 to + 40 -: Audio volume level goes down. AUDIO 22 Video Adjustment and Setup Video Adjustment (Video Input, S-Video Input) Setup of this monitor will be performed in the VIDEO ADJUST menu. Notes: • The menu title display differs depending on the selected input signal. Before adjustment, press the INPUT SELECT button surely to select the input signal. (Refer to p. 13.) • If the power is shut down during setup, the setting values will not be saved. 1. Press the MENU button. The top menu will be displayed. VIDEO ADJUST PC SETUP LANGUAGE EXIT 2. Move the cursor to VIDEO ADJUST by pressing the C or D button. Press the MENU button. The VIDEO ADJUST menu will be displayed. Present input signals are displayed in the menu title. For video input (A): VIDEO A IN For video input (B): VIDEO B IN For S-video input: S-VIDEO IN VIDEO B IN NTSC BRIGHTNESS 00 CONTRAST 00 SHARPNESS 00 COLOR 00 TINT 00 H-POINT 00 COLOR TEMP 6500K SCAN FULL NORMAL SETTINGS EXIT To the right side of the menu title, the input signal type is displayed as specified below. NTSC: When a video signal input of the NTSC system is entered or if there is no signal PAL: When a video signal input of the PAL system is entered 15