Panasonic WV-LC1700 Operating Instructions - Page 18

Setting of PC Input While the PC input signal is being selected, you can adjust the horizontal position and vertical position. Note: Since this unit detects input signals and makes automatic adjustments as required, this setting is not required in ordinary cases. 1. Press the MENU button. The top menu will be displayed. PC IN H-POSITION V-POSITION CLOCK PHASE AUTO EXIT 1280 x 1024@60 Hz 00 00 +01 +38 VIDEO ADJUST PC SETUP LANGUAGE EXIT 2. Move the cursor to SETUP by pressing the C or D button. Press the MENU button. The PC SETUP menu will be displayed. Present input signals are displayed in the menu title. For PC input terminal: PC IN According to the timing data table ( Page 9), present signals are displayed at the right side of the menu title in the format of [Resolution@Refresh rate (Vertical frequency)]. 3. Move the cursor to AUTO by pressing the C or D button. Press the MENU button. The image display position will be adjusted automatically. Notes: • The screen flickers during automatic adjustments. This is, however, not a malfunction. • According to the situation of video signals, it takes several seconds to 10-odd seconds to complete automatic adjustments. If an optimal screen cannot be obtained after automatic adjustments, further operation specified below may be needed. 4. Move the cursor to the following setting items by pressing the C or D button. Then, adjust the levels by pressing the + or - button. Setting item H-POSITION V-POSITION CLOCK PHASE Effect +: Screen moves to the right. -: Screen moves to the left. +: Screen moves upwards. -: Screen moves downwards. +: Clock is enlarged. -: Clock is contracted. +: Phase is increased. -: Phase is decreased. Setting value - 40 to + 40 - 20 to + 20 - 20 to + 20 0 to +63 5. Select EXIT, and press the MENU button. The top menu will be displayed. 6. Select EXIT on the top menu, and press the MENU button. The monitor display return to the default status. Notes: • If no operation has been performed for 10 seconds or more, the monitor display returns to the default status. • Check if the VGA output setting has been performed for the connected PC. (Refer to p. 9.) • This monitor does not support plug-and-play. Depending on the connected PC, the PC SETUP menu can be controlled from the PC keyboard. However, proper adjustment is not supported. 18