Panasonic WV-LC1700 Operating Instructions - Page 9

!6 S-video input connector (S-VIDEO IN) Accepts an S-video signal from an external device. Note: This connector and the VIDEO-B IN connector is connected to the same device. When an S-video signal and composite video signal are supplied from a device at the same time, the S-video signal is accepted by priority. !7 Video input B connector (VIDEO-B IN) Accepts a composite video signal from an external device. !8 Video output B connector (VIDEO-B OUT) Supplies a composite video signal accepted by the VIDEO-B IN connector to another external device. !9 Video input A connector (VIDEO-A IN) Accepts a composite video signal from an external device. @0 Video output A connector (VIDEO-A OUT) Supplies a composite video signal accepted by the VIDEO-A IN connector to another external device. @1 Screw holes for rack mount bracket ( page 10) @2 Fall prevention clamp Using the clamp with strong wire or chain (commercially available), secure the monitor to a sufficiently strong wall or pillar for fall prevention. When a wall mounting bracket is used, remove the clamp. @3 Security slot You can attach a lock that meets the industry standard specification (3 to 3.26 mm x 7 to 7.26 mm x 3.5 to 4 mm) {0.12" x 0.28" x 0.15"}. @4 Screw holes for wall mount bracket ( page 11) Timing data chart for PC input This monitor supports the timing data listed as follows. Resolution 640 x 400 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 Vertical frequency (Hz) 85 85 60 72 75 56 60 72 75 60 70 75 75 60 60 75 Horizontal frequency (kHz) 37.9 37.9 31.5 37.9 37.5 35.1 37.9 48.1 46.9 48.4 56.5 60.0 67.5 60.0 64.0 80.0 Dot clock frequency (MHz) 31.500 35.500 25.175 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 108.000 108.000 108.000 135.000 Standards VESA standard VESA standard Industry standard VESA standard VESA standard VESA guideline VESA guideline VESA standard VESA standard VESA guideline VESA standard VESA standard VESA standard VESA standard VESA standard VESA standard Notes: • If an input signal does not meet the standards (dot clock frequency, horizontal frequency, and vertical frequency), "OUT OF RANGE" will appear on the screen. • This monitor does not support plug-and-play. 9