Panasonic WV-LC1700 Operating Instructions - Page 20

Troubleshooting Check the following before requesting repair. If a trouble cannot be corrected even after checking and trying remedy, contact your dealer. Symptom Cause/solution Reference pages Power is not turned on. Check if the power plug is properly connected to the AC outlet. - Check if the power plug is properly inserted into the DC IN jack of this monitor. - "NO SIGNAL" appears on the screen, and no image is displayed. Check the cables are properly inserted into the connectors. Check if the cable connection is corresponding with the selected input signal. 8 - 9, 13 8 - 9, 13 "OUT OF RANGE" appears on the screen, and no picture is displayed. When the PC input signal does not meet the standards of this monitor, no picture is displayed. → Check the specifications of connected PC. 9, 18 Picture display position is not proper while the PC input signal is being selected. The power cord insulation is damaged. The power cord, plug and connectors get hot during use. The power cord gets hot when bent or stretched. Perform auto adjustment on the PC menu. If the picture display position is not properly adjusted, perform manual adjustment. 18 The power cord, plug and connectors are worn out. If you continue to use it, a fire or an electric shock may occur. Unplug the AC adapter immediately, and refer servicing to quali- - fied service personnel. "VIDEO LOSS" appears in the center of the screen, and no image is displayed. No reaction is observed by pressing the front buttons. Check whether the cable is appropriately connected. Check whether the external devices such as the camera are turned on. Press the reset switch to restart this unit. 8 - 9 8 - 9 20