Panasonic WV-LC1700 Operating Instructions - Page 8

Major Operating Instructions and Their Functions Front View Rear View @1 @2 @3 @4 */165 4&-&$5 .&/6 4&-&$5 "6%*0 Video Monitor WV-LC1900 wr y q et u i o !0 q Power button Powers on or off the monitor. Note: Power is supplied from the connected cable even while the monitor is OFF. w Power indicator This indicator lights green while power is supplied to the monitor. Even though the monitor power is turned off, it lights in red while the power supply is available. e Input signal selection button (INPUT SELECT) Every pressing this button can change input signals as follows. VIDEO A PC VIDEO B/ S-VIDEO r Menu button (MENU) • Displays the VIDEO ADJUST menu. • Determines the selected parameter in setup menus. t Selection buttons (SELECT: C, D) These buttons move the cursor in setup menus. y Audio buttons (AUDIO: +, -) These buttons adjust the audio volume level. These buttons increments or decrements the selected parameter in setup menus. 8 !3 !5 !7 !9 !1 !2 !4 !6 !8 @0 u Reset switch Provideds restart this unit as necessary. i Monitor stand o LCD panel Note: Take care not to pinch your hands or fingers between the LCD panel and the monitor stand. !0 Speaker !1 Power cord clamp After the power cord has been connected, remove the screw that is used to mount the power cord clamp and fasten the power cord. !2 Power input jack (AC IN) Connect the power cord (accessory). !3 PC input connector (PC IN) Accepts an analog RGB signal from a PC. Note: For timing data this connector supports, refer to p. 9 "Timing data chart for PC input". !4 Audio input connector (AUDIO IN) With an audio cable connection, this connector accepts an audio signal from an external device and supplies the signal to the built-in speaker. !5 Audio output connector (AUDIO OUT) Supplies an audio signal accepted by the AUDIO IN connector to another external device.