Panasonic WV-NW502S Operating Instructions - Page 54
Con the alarm settings [Alarm], Con the settings relating to the alarm action [Alarm - installation guide
View all Panasonic WV-NW502S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD area settings, and the alarm occurrence notification can be configured on this page. The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab. Configure the settings relating to the alarm action [Alarm] Click the [Alarm] tab on the "Alarm" page. ( pages 20 and 21: How to display/operate the setup menu) The settings relating to the alarm can be configured in this section. Refer to pages 55 and 57 for further information about the settings relating to the alarm and the alarm output terminal. Alarm [Terminal 1] Determine how to use terminal 1. Alarm input: Receives alarms. Black & white input: Receives the black & white switchover input. (When the input is set to On, the black & white mode is activated.) Off: Not used. Default: Off [Terminal 2] Determine how to use terminal 2. Alarm input: Receives alarms. Alarm output: Alarm output will be carried out accord- ing to the settings for "Alarm output terminal setup" ( page 57). Off: Not used. Default: Off [Terminal 3] Determine how to use terminal 3. Alarm input: Receives alarms. AUX output: AUX output will be supplied. The [AUX] buttons will be displayed on the "Live" page. Exposure output: The CCD exposure timing pulse output is provided. (The close output is provided only during CCD exposure.) Off: Not used. Default: Off Note: • AUX is a camera terminal that allows users to oper- ate (Open/Close) arbitrarily from the "Live" page. For example, an operator can remotely control lights in a place where the camera is installed by connecting the terminal to the light controller. • Refer to the installation guide for further information about input/output terminals. [VMD alarm] When clicking "VMD >>", the [VMD area] tab of the "Alarm" page will be displayed. [Command alarm] Select "On" or "Off" to determine whether or not to receive the command alarm. The command alarm is the function that provides notification of a Panasonic protocol alarm from the other cameras. When "On" is selected, alarm actions will be performed between multiple cameras. Default: Off [Originating port number] Select a port number to be used to receive the command alarm. Available range: 1 - 65 535 Default: 8 181 54