Panasonic WV-NW502S Operating Instructions - Page 82
Upgrade the firmware [Upgrade], version], [IPL version], [IP address, IPv6] - wv nw502 viewer software
View all Panasonic WV-NW502S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Upgrade the firmware [Upgrade] Click the [Upgrade] tab of the "Maintenance" page. ( pages 20 and 21: How to display/operate the setup menu) The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further information about the firmware upgrade. Step 3 Click the radio button respective to the desired option to determine whether or not to initialize the settings after completing the firmware upgrade. Note: • Read the "Readme" file provided with the firmware first and determine whether or not to reset the settings to the defaults after the firmware upgrade. [Model no.], [MAC address], [Serial no.], [Firmware version], [IPL version], [HTML version], [IP address (IPv6)], [Viewer software installation counter] Information of each item will be displayed. Step1 Contact the dealer and download the latest firmware onto a PC. Important: • A blank (space) cannot be used for the name of the directory where the downloaded firmware to be saved. Step 2 Click the [Browse...] button and designate the downloaded firmware. 82 Step 4 Click the [Execute] button. → The confirmation window will be displayed. When "Do not reset the settings to the default after the upgrade." is selected, the confirmation window will not be displayed. After completing the upgrade, delete temporary internet files. ( page 91) Important: • Upgrade the firmware using a PC in the same sub- net as the camera. • Follow the instructions from the dealer when upgrad- ing the firmware. • Use the designated file (extension: img) for the firmware upgrade. • The name of the firmware to be used for the upgrade should be "np502_xxxxx.img". (The same holds true for WV-NW502S.) * ("xxxxx" indicates the version of the firmware.) • Do not turn off the power of the camera during the upgrade process. • Do not perform any operation during upgrading and wait until it completes. • The following network settings will not be reset when upgrading the firmware after selecting "Reset the settings to the default after completing the upgrade. (Except the network settings)". On/Off for DHCP, IP address, subnet mask, default gateway, HTTP port, line speed, bandwidth control (bit rate), time & date • The viewer software used on each PC should be licensed individually. Refer to your dealer for the software licensing.