Panasonic WV-NW502S Operating Instructions - Page 73
IPv6 network, Common, Line speed]
View all Panasonic WV-NW502S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
IPv6 network [Manual] Select "On" or "Off" to determine whether or not to manually configure the IP address for IPv6 network (IPv6 address). On: Enter IPv6 address manually. Off: Manual entry of IPv6 address will become unavail- able. Default: Off [IP address(IPv6)] When "On" is selected for "Manual", manual entry of the IPv6 address is required. Do not enter an address already in use. Note: • When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible router and turn on the automatic IPv6 address assignment function. In this case, it is necessary to configure IPv6 address including prefix information provided from the IPv6 compatible router. Refer to the operating instructions of the router in use for further information. Common [DNS] Determine how to set the address of the DNS server by selecting "Auto" (obtain the address automatically) or "Manual" (enter the address of the DNS server). When "Manual" is selected, it is necessary to configure the settings for the DNS. When using the DHCP function, it is possible to obtain the DNS address automatically by selecting "Auto". Refer to the network administrator for further information about the settings. Default: Manual [Primary server address], [Secondary server address] When "Manual" is selected for "DNS", enter the IP address of the DNS server. Refer to the network administrator about the IP address of the DNS server. Note: • It is impossible to use both an IPv4 DNS server and an IPv6 DNS server. [HTTP port] Assign the port numbers independently. The following port numbers are unavailable since they are already in use. Available port number: 1 - 65 535 Default: 80 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 554, 995, 10 669, 10 670, 59 000 - 59 999, 60 000 - 61 000 [Line speed] Select the line speed for data transmission from the following. It is recommended to use with the default "Auto". Auto: Line speed will be applied automatically. 100M-Full: 100 Mbps full-duplex 100M-Half: 100 Mbps half-duplex 10M-Full: 10 Mbps full-duplex 10M-Half: 10 Mbps half-duplex Default: Auto [FTP access to camera] Select "Allow" or "Forbid" to determine whether to allow or forbid the FTP access to camera. Default: Forbid [Bandwidth control(bit rate)] Select the total bit rate for data transmission from the following. Unlimited/64kbps/128kbps/256kbps/384kbps/512kbps/ 768kbps/1024kbps/2048kbps/4096kbps/8192kbps Default: Unlimited Note: • When selecting "64kbps", select "Off" for "Audio transmission/reception" on the [Audio] tab. ( page 51) • Select "128kbps" or a faster rate to carry out the live transmission of JPEG images and the FTP periodic image transmission simultaneously. • When "Bandwidth control(bit rate)" is set low, taking a picture using the one shot button may not function depending on the use environment. In this case, select "QVGA" for "Image capture size" of "JPEG" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab or set "Image quality" of "JPEG" lower. 73