Panasonic WVCP284 Color Cctv Camera - Multi Language - Page 13

• 24 V AC (WV-CP284) The recommended cable length and thickness are shown in the table for reference. The voltage supplied to the power terminals of the camera should be within 19.5 V AC and 28 V AC. Power cord (not supplied) AC 24V IN Copper wire #24 #22 #20 #18 size (AWG) (0.22 mm2) (0.33 mm2) (0.52 mm2) (0.83 mm2) Length (m) 20 30 45 75 1L 2N Length (ft) 66 100 150 250 GND n Bundle the coaxial cable and the power cord to the camera mount bracket with cable ties (not supplied). Important: • When bundling the cables with cable ties, cable ties should have enough tolerable intensity and durability, such as a metal cable tie since a coaxial cable can support the camera in case of falling of the camera from the camera mount bracket. Camera mount bracket (option) Bundle the cables and fix them onto the camera mount bracket firmly. Example: Ceiling mount installation Bundle the cables and fix them onto the camera mount bracket firmly. Camera mount bracket (option) Example: Wall mount installation m Adjust the focus position. Loosen the flange-back lock screw and rotate the flange-back adjustment ring to adjust the focus position while monitoring the video monitor. When completing the adjustment, tighten this screw. Recommended tightening torque: 0.05 N·m {0.5 kgf·cm} Important: • When the screw is tightened stronger than the recommended tightening torque, it may strip the thread or cause focus misalignment. Notes: • When using a fixed-focal lens featuring the focus adjustment, adjust the flange-back length after setting the lens focus to the FAR end. • When using a vari-focal lens featuring the focus adjustment, refer to the operating instructions of the lens in use. 13