Panasonic WVCP464 WVCP460 User Guide - Page 3
Video Cable - cameras
View all Panasonic WVCP464 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
6. High quality picture: (a) 2H type vertical enhancer for greater picture sharpness (b) Chroma averaging circuit for better color signal-to-noise ratio (c) Minimum of aliasing on fine objects (d) Expanded dynamic range by use of knee circuit (e) Highlight aperture correction for greater picture detail of bright objects 7. Ability to shoot indoor scenes with fixed iris lens by use of Electronic Light Control (ELC) function. 8. Selectable electronic sensitivity enhancing modes including AUTO, MANUAL and OFF 9. Built in Digital Motion Detector y Down Button ( ) This button is used to move the cursor downward. It is also used to select items in the CAM SET UP menu. u Left Button ( ) This button is used to move the cursor to the left. It also selects the mode and can be used to adjust some levels. i Up Button ( ) This button is used to move the cursor upward. It is also used to select items in the CAM SET UP menu. o Right Button ( ) This button is used to move the cursor to the right. It also selects the mode and can be used to adjust some levels. !0 Set Button ( ) This button is used to activate an item selected in the CAM SET UP menu. !1 Gen-lock Termination Switch (Hi-Z, G/L 75 Ω) Set this switch to Hi-Z when a gen-lock video input signal is looped through. In all other cases, set this switch to 75 Ω. !2 Gen-lock Input Connector (GEN-LOCK) This connector is used to connect an external system for synchronization. !3 Video Output Connector (VIDEO OUT) This connector is used to connect the VIDEO IN connector of the monitor. !4 AC Inlet Socket This socket is used to connect the power cord (supplied as a standard accessory). !5 AC/DC Compatible Input Terminal (DC 12 V IN/AC 24 V IN) This terminal is for connecting the 12 V DC or 24 V AC power supply cord. Cautions: 1. Connect to 12 V DC (10.8 V-16 V) or 24 V AC (19.5 V-28 V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24 V AC power source. 2. To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the Input Terminal. 2. 24 V AC Power Supply Connect the power cable to the AC/DC compatible input terminal on the rear panel of the camera. DC 12V AC 24V IN IN 1 2 GND 24 V AC, 60 Hz (19.5 V - 28 V) Recommended wire gauge sizes for 24 V AC line. Copper wire #24 #22 #20 #18 size (AWG) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2) Length (m) 95 150 255 425 of Cable (Approx.) (ft) 314 495 842 1 403 Caution: To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007). Video Cable 1. It is recommended to use a monitor whose resolution is at least equal to that of the camera. 2. The maximum extensible coaxial cable length between the camera and the monitor is shown below. Type of coaxial cable RG-59/U RG-6U RG-11/U RG-15/U (3C-2V) (5C-2V) (7C-2V) (10C-2V) Recommended (m) 250 maximum cable length (ft) 825 500 1 650 600 1 980 800 2 640