Panasonic WVCW384 WVCW384 User Guide - Page 22
Basic operation, PRIVACY ZONE OFF - wv cw384 controller
UPC - 791871505830
View all Panasonic WVCW384 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Basic operation The following are descriptions of how to configure each setup item using the operation buttons (refer to page 8) on the camera. Setup using an optional system controller is also available. Note: • The illustrations below are the examples to be displayed on a video monitor. 1. Hold down the [SET] button for around 2 seconds. → The top page will be displayed. 2. Move the cursor onto "END" by press the [UP] or [DOWN] button. MODEL WV-CW384 CAMERA BACK-FOCUS SPECIAL LANGUAGE 3. Press the [SET] button after moving the cursor onto "SETUP" by pressing the [RIGHT] button. → The "DISABLE" indication will change into "ENABLE" and the settings will become editable. END SETUP DISABLE MODEL WV-CW384 CAMERA BACK-FOCUS SPECIAL LANGUAGE 4. Move the cursor onto the desired setup item and press the [SET] button. → The setup page of the selected setup item will be displayed. 5. Configure the settings for each item. Select setup item: Move the cursor by pressing the [UP] or [DOWN] button. Change the parameter: Press the [LEFT] or [RIGHT] button. Display the detailed settings page of the setup item: Press the [SET] button when the setup item with the [O] mark is selected. Go back to the previous page: Move the cursor onto "RET" and press the [SET] button. Go back to the top page: Move the cursor onto "TOP" and press the [SET] button. END SETUP ENABLE **CAMERA SETUP** 1/2 CAMERA ID OFF ALC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF SYNC INT WHITE BAL ATW1 MOTION DET OFF DNR HIGH RESOLUTION HIGH BW MODE **CAMERA SETUP** 2/2 PRIVACY ZONE OFF EL-ZOOM OFF STABILIZER OFF LED ON RET TOP END 6. To exit from the SETUP menu and display images from the camera, move the cursor onto "END" and press the [SET] button. Notes: • To prevent erroneous operations, the "DISABLE" indication will always be displayed when the top page is displayed from the camera. To operate the SETUP menu, switch the "DISABLE" indication to the "ENABLE" indication first. • The cursor position will be displayed highlighted. 22