Panasonic WVSF332 WVSF332 User Guide - Page 24
pen, and release the button when the cable of, the external device is fully inserted into the ter
View all Panasonic WVSF332 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Important: • Connect/disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices. Otherwise, loud noise may be heard from the speaker. c Connect an external speaker with amplifier to the audio output connector (for use of the audio transmission function). Connect a stereo mini plug (ø3.5 mm) (monaural output). • Recommended cable length: Less than 10 m {33'} MONITO OU RT FTROOPNT 4 E3XT2I/O1 Audio output connector AUODUITO MLICIN/ E IN 101B0A0SBEA-STE/-IX IN F IN F v Connect the cables of external devices to the EXT I/O terminal plug (accessory). q When connecting an external device, remove 8 mm - 9 mm {5/16" - 11/32"} of the outer jacket of the cable and twist the cable core to prevent the short circuit first. Specification of cable (wire): 20 AWG - 26 AWG Single core, twisted w Push down the button of the desired terminal on the external I/O terminal plug with a ballpoint pen, and release the button when the cable of the external device is fully inserted into the terminal hole. Make sure that the cable is firmly connected to the terminal. e After the cable connection, connect the external I/O terminal plug to the external I/O terminals of the camera. * Check whether the stripped part of the wire is not exposed and is securely connected. r GND e AUX OUT 4 321 q ALARM IN w ALARM OUT 24 Strip range 8 mm - 9 mm {5/16" - 11/32"} Button 43 21 External I/O terminal plug External I/O terminals MONITO OU RT FTROOPNT 4 E3XT2I/O1 AUODUITO MLICIN/ E IN 101B0A0SBEA-STE/-IX