Panasonic WVSF332 WVSF332 User Guide - Page 26

When using PoE IEEE802.3af compliant, and the network connector of the camera.

Get Panasonic WVSF332 - IP NETWORK CAMERA PDF manuals and user guides View all Panasonic WVSF332 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Important: • Be sure to use the power cord plug provided with this product. • Be sure to fully insert the power cord plug into the 12 V DC power supply terminal (accessory). Otherwise, it may damage the camera or cause malfunction. • Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption (☞ page 39). t Run the 12 V DC output cable through the gap of the cable hook. 12 V DC output cable Cable hook 12V=IN When using PoE (IEEE802.3af compliant) Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub) and the network connector of the camera. * PAL models only Important: • Use all 4 pairs (8 pins) of the LAN cable. • The maximum cable length is 100 m {328'}. • Make sure that the PoE device in use is compliant with IEEE802.3af standard. • When connecting both the 12 V DC power supply and the PoE device for power supply, PoE will be used for power supply. • When disconnecting the LAN cable once, reconnect the cable after about 2 seconds. When the cable is quickly connected, the power may not be supplied from the PoE device. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
26
Important:
• Be sure to use the power cord plug provided with this product.
• Be sure to fully insert the power cord plug into the 12 V DC power supply terminal (accessory).
Otherwise, it may damage the camera or cause malfunction.
• Be sure to use an AC
adaptor compliant with the Specifications regarding power source and
power consumption (
☞
page 39).
t
Run the 12 V DC output cable through the gap of the cable hook.
12V=IN
12 V DC output cable
Cable hook
When using PoE (IEEE802.3af compliant)
Connect a LAN cable (category 5 or better, straight, STP*) between a PoE device (such as a hub)
and the network connector of the camera.
* PAL models only
Important:
• Use all 4 pairs (8 pins) of the
LAN cable.
• The maximum cable length is 100 m {328'}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, PoE
will be used for power supply.
• When disconnecting the LAN cable once, reconnect the cable after about 2 seconds. When
the cable is quickly connected, the power may not be supplied from the PoE device.