Panasonic WVSF332 WVSF332 User Guide - Page 37
Dns To Auto. - software
View all Panasonic WVSF332 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
z Start the Panasonic IP setting software. x Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note: • When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] button of the IP setting software. • When a duplicate IP address is used, the corresponding MAC address/IP address will be displayed shaded. c Complete each network setup item and click the [Apply] button. Note: • When using a DHCP server, it is possible to set "DNS" to "AUTO". Important: • It may take for around 2 minutes to complete to upload the settings to the camera after clicking the [Apply] button. The settings may be invalidated when the 12 V DC power supply is cut or when the AC adaptor or the LAN cable is disconnected before completing the upload. In this case, perform the settings again. • When using a firewall (including software), allow access to all UDP ports. 37