Pentair MagicFlame Fire and Water Bowl MagicFlame Install and Users Guide - Page 21

Pentair MagicFlame Fire and Water Bowl Manual

Get Pentair MagicFlame Fire and Water Bowl PDF manuals and user guides View all Pentair MagicFlame Fire and Water Bowl manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

20 REPLACING THE BURNER ORIFICE (CONT.) 12. Position the heat shield and tighten the jam nut by hand until it holds the heat shield in place. 13. Using a wrench, tighten the jam nut until the heat shield is firmly secured. 14. Apply pipe thread sealer onto the burner inlet pipe. See FIGURE 22. 15. Thread the control box outlet onto the burner inlet pipe and clockwise until tight. See FIGURE 23. Note: Ensure the heat shield is not blocking the pilot hole. See FIGURE 24. 16. Update the label on the bottom of the control box to indicate the fire feature has been converted to operate on propane gas. FIGURE 22 FIGURE 23 FIGURE 24 MAGICFLAME™ Fire and Water Bowl Installation and User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
20
MAGICFLAME™ Fire and Water Bowl Installation and User’s Guide
REPLACING THE BURNER ORIFICE
(CONT.)
12. Position the heat shield and tighten the jam nut by hand until it holds the heat shield in place.
13.
Using a wrench, tighten the jam nut until the heat shield is firmly secured.
14. Apply pipe thread sealer onto the burner inlet pipe. See
FIGURE 22
.
15. Thread the control box outlet onto the burner inlet pipe and clockwise until tight. See
FIGURE 23
.
Note:
Ensure the heat shield is not blocking the pilot hole. See
FIGURE 24
.
16.
Update the label on the bottom of the control box to indicate the fire feature has been converted to operate on
propane gas.
FIGURE 22
FIGURE 23
FIGURE 24