Pentax 645D Operation Manual - Page 95

Error Messages Error Message Description Memory card full The SD Memory Card is full and no more images can be saved. Insert a new SD Memory Card or delete unwanted images. No image There are no images for playback on the SD Memory Card. This image cannot be You are trying to play back an image in a format displayed not supported by this camera. No card in the camera The SD Memory Card is not inserted in the camera. Cannot use this card The inserted SD Memory Card is not compatible with this camera. Memory card error Card is not formatted The SD Memory Card has a problem, and image capture and playback are impossible. 1The SD Memory Card you have inserted is unformatted or has been formatted on other device and is not compatible with this camera. Use the card after formatting it with this camera. Card is locked The write-protect switch on the SD Memory Card you have inserted is locked. Unlock the SD Memory Card. The card is Data are protected by the SD Memory Card electronically locked security feature. This image cannot be You are trying to enlarge an image that cannot enlarged be enlarged. This image is protected The image is protected. Remove the protection from the image. Battery depleted The battery is exhausted. Install a charged battery in the camera. Error Message Description Not enough battery power remaining to clean sensor Not enough battery ' power remaining to activate Pixel Mapping Appears if the battery level is insufficient. Replace the battery with a fully charged one or use an AC adaptor kit K-AC50 (optional). The maximum folder number (999) and file Image folder cannot be number (9999) are being used. and no more created images can be saved. Insert a new SD Memory Card or format the card. Unable to store image The image could not be saved because of an SD Memory Card error. Settings not stored The DPOF settings could not be saved because the SD Memory Card is full. Delete unwanted images and perform DPOF settings again. The operation could not be completed correctly The camera was unable to measure the manual white balance or detect dust on the sensor. Try the operation again. No more images can be selected You cannot select 100 or more images at a time for Index, Select & Delete or Developing Multiple RAW Images. Appears when Digital Filter, Resize. Cropping. CD This image cannot be processed Save as Manual WB, or RAW Development is started for images captured with other cameras, or when Resize or Cropping is started for minimum size images. The camera failed to create an image The creation of an index print image failed. Caution • Error messages related to an SD Memory Card appear for each card slot being used. If an error message appears, take the appropriate action for the respective card slot. 93