Pentax AF360FGZ Operation Manual - Page 25
P-TTL Auto Flash
UPC - 027075121041
View all Pentax AF360FGZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
■P-TTL Auto Flash EffectiveFlash range Refer to page 22 for the features and conditions of use of this flash mode. Procedure 1 Turn on the flash unit. 2 Press the flash mode button (MODE) until (P-TTL) is displayed on the LCD panel. 3 Set the sync mode switch to leading curtain sync ( ), trailing curtain sync ( ), or contrast-control ( ), according to the subject. (Refer to page 29.) ● After turning the power (ON), the setting will be (P-TTL) and (A.Zoom). 4 Set the zoom position. (The setting method differs according to your camera and lens. Refer to page 18.) 5 Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture. ● In the following cameras, if the correct flash output is obtained, the flash mode indicator and ( ) in the viewfinder will blink. *ist, MZ-S, MZ-L/ZX-L/MZ-6 For details, refer to "Auto Check Display" on page 9. ● The correct flash output is obtained in P-TTL auto mode only when the flash unit is used with autofocus lenses. ● If necessary, an exposure compensation amount can be set between +1.0 to -3.0 steps in 0.5-step increments. (Refer to page 15.) 23