Pentax AF360FGZ Operation Manual - Page 41
When Attaching the AF360FGZ to the Camera for Control Flash - wireless mode
UPC - 027075121041
View all Pentax AF360FGZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
When Attaching the AF360FGZ to the Camera for Control Flash Main flash Control flash only: not used for main flash (Preparation of Flash Unit Attached to Camera) 1 Firstly, set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera. Attach the AF360FGZ to the hot shoe of the camera after turning the camera off. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode switch to (C), so that CONTROL is displayed in the upper right corner of the LCD panel. Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel. Press the channel button (CH) and select a channel from 1CH to 4CH. Slide the setting switch back up to the (white dot). 39