Pentax AF360FGZ Operation Manual - Page 45
Wireless High-Speed Sync Photography, Using the AF360FGZ in Combination with a, Built-in Flash Unit
UPC - 027075121041
View all Pentax AF360FGZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Wireless High-Speed Sync Photography (Using the AF360FGZ in Combination with a Built-in Flash Unit) 1 Firstly, set the wireless mode and channel of the AF360FGZ, and register the channel on the camera. Turn the camera off and then attach the AF360FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode switch to (S), so that SLAVE is displayed in the upper right corner of the LCD panel. ● You cannot set the flash unit to SLAVE while the exposure metering timer is on (while information relating to aperture etc. is displayed in the viewfinder). Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel. Press the channel button (CH) and select a channel from 1CH to 4CH. Slide the setting switch back up to the (white dot). 43