Pentax AF360FGZ Operation Manual - Page 35
Contrast Control Sync Flash, AF360FGZ detached from the camera.
UPC - 027075121041
View all Pentax AF360FGZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
■Contrast Control Sync Flash Refer to page 29 for the features and conditions of use of this sync mode. ● Refer to "Connecting the AF360FGZ with the Extension Cord" on page 56 on using the AF360FGZ detached from the camera. Procedure 1 Turn on the power switch. 2 Set the sync mode switch to contrast-control ( ). 3 Set the zoom position. (The setting method differs according to your camera and lens. Refer to page 18.) ● If the AF360FGZ is closer to the subject than the flash unit to be used in combination, use (M.Zoom) to set the zoom position to a shorter lens focal length. 4 Turn on the flash units to be used in combination. ● If the camera's built-in flash unit is part of the combination, pop up the built-in flash. 5 Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture. 33