Pentax DS Operation Manual - Page 144
Press the, button., Changing the Exposure Setting Steps
UPC - 027075110618
View all Pentax DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
142 Changing the Exposure Setting Steps Set Exposure Setting Steps in [Expsr Setting Steps] in [A Custom] to increments of 1/2EV or 1/3EV. Expsr Setting Steps 1/2 EV Steps 1/3 EV Steps Exposure setting steps are set to 1/2 EV Recording the Exposure Before Shooting (AE Lock) AE Lock is a function that memorizes the exposure prior to taking the 5 picture. Use this when the subject is too small or backlit and a proper exposure setting cannot be obtained. 1 Press the L button. The camera memorizes the exposure (brightness) at that instant. Press it again to unlock. Function Reference • @ is displayed in the viewfinder while the AE lock is engaged. (p.20) • The exposure remains in memory for twice as much time as the metering timer after releasing the L button. The exposure remains locked as long as the L button is kept pressed or the shutter release button is kept pressed halfway. • You will hear a beep when the L button is pressed. The beep can be turned off. (p.163) • AE lock is not available when the exposure mode is set to p (Bulb) mode. • The combination of shutter speed and aperture value changes depending on the zooming position even while the AE lock is engaged when using a zoom lens for which maximum aperture varies depending on the focus length. However, the exposure value does not change and the picture is taken at the brightness level set by the AE lock. • If exposure mode is a (Manual), aperture and shutter speed are adjusted to set the appropriate exposure when the L button is pressed. • Exposure can be fixed when focus is locked. Set in [AE-L with AF locked] in the [A Custom] menu. (p.126)